XSW 1-825 / XSW 1-835
提升你的聲音!讓歌手和演示者易於使用的一體化無線系統。
選擇產品變體

提升你的聲音!選擇XS WIRLESS 1,能讓用家依靠無線傳輸和多達10個兼容的頻道,以穩定的UHF頻段。 XS WIRELESS 1 聲樂套裝是一個讓歌手和主持人易於使用的一體化無線系統,配合Sennheiser著名的變革咪高峰膠囊,讓e825(動態心型)或e835(超級動態心型)的現場聲音獲得展現。該套裝包括一個直觀的固定式接收器、米高峰和咪高峰夾具,能作快速設置和易於操作。

  • Sennheiser著名的變革咪高峰膠囊(e825或e835)

  • 天線切換分集接收

  • 集成天線

  • 通過遠讀波道自動進行頻率管理和同步,便於設置

  • 在大頻寬內可選UHF頻率

  • 多達10個兼容的頻道

Pro Talk Video Series

Pro Talk Video Series

World-renowned Sound Engineers sharing tips, tricks and stories.
Subscribe and do not miss any episode of our Pro Talk Video Series
on YouTube! 更多細節
評測
Be the first to write a review.

Specifications
包裝內含
  • 1個接收器EM-XSW 1
  • 1個手持式發射機器SKM 825-XSW或SKM 835-XSW
  • 1個咪高峰夾鉗MZQ 1
  • 1套電源供應NT 12-5 CW
  • 2枚AA電池

支援
聯繫我們
Product Support Phone

Product Phone


FAQ
  • How do I find a frequency (ie: perform a frequency scan)?

    To perform a frequency scan on the XS Wireless products follow these steps:

    1) Press the "UP" or "DOWN" button to scroll through the menu options on the receiver.

    2) Press the "SET" button to select the SCAN option. NOTE: The unit automatically selects the next available unused frequency. 

    Once the new frequency is selected on the receiver the transmitter needs to by synced to the receiver. To do this follow these steps:

    1) Press and hold the "SYNC" button on the transmitter until the "SYNC" symbol flashes on the receiver.

    2) Press the "SYNC" button on the receiver.

    NOTE: If a frequency SCAN is performed and no available frequencies are found then the SQUELCH setting will need to be increased. Once the SQUELCH setting has been increased repeat the steps of the frequency scan and then SYNC accordingly.



  • What adjustments can I do to improve sound quality?

    There are two settings that have the greatest effect on sound quality:

    MICROPHONE SENSITIVITY
    This is how sensitivity the microphone pick up is and this is adjusted on the microphone/body pack itself. Typically for general speaking the sensitivity should be set around -15 to -18 dB. You will need to adjust this depending on the exact application. Adjusting closer to 0 dB is will be more sensitive and further away from 0 dB is less sensitive. If the microphone is too sensitive the input will overload the microphone and the AF level will peak and the audio will be clipped.  It is suitable to adjust the level so that the AF peak indicator lights up only briefly during the loudest passages.

    AF OUTPUT
    This is how strong the signal is exiting out of the receiver into the sound board/speakers/etc. Typically this will be set to 0 dB or +6 dB if connected to equipment which is expecting a line level input . If you are connected to equipment expecting a mic level input you will typically need to drop this AF output down to -24 dB or -30 dB.  If your equipment has the option, it is best to try to run the equipment in line level mode.

    NOTE: If the AF Output is too high it may over load the input on any connected equipment (sound board/speakers/etc) and may create noise in the form of distortion/rumbling.



  • Why is there no audio coming from the microphone?

    Not having audio coming from a microphone could be caused by a few different scenarios.
    Firstly check that the transmitter and receiver are both on the same frequency as this is key to the system working.
    Next check to make sure that the "MUTE" switch is not accidentally engaged (either fully or partially). The best way to do this is click the mute switch on and then back off.
    After checking the "MUTE" switch if no audio is present make sure that the microphone element is securely in place. If using a body pack transmitter make sure that the microphone or guitar cable is securely in place by disconnecting it and reconnecting it. NOTE: On the handheld microphone the capsule is locked into place and cannot come loose.
    If you are seeing RF and AF levels on the receiver but do not have any sound through your system it would be recommended to check the cables between the receiver and sound system, check the inputs on the sound system and check the AF out level on the receiver to ensure that it is set to the appropriate level for your sound system.



下載

  • Frequency Sheets
    • Frequency Sheets XS Wireless 1&2 K range (925 - 937.5 MHz) (210 KB) 下載

    • Frequency Sheet XS Wireless 1&2 A range (548 - 572 MHz) (190 KB) 下載

    • Frequency Sheet XS Wireless 1&2 B range (614 - 638 MHz) (190 KB) 下載

    • Frequency Sheet XS Wireless 1&2 C range (766 - 790 MHz) (190 KB) 下載

    • Frequency Sheet XS Wireless 1&2 D range (794 - 806 MHz) (190 KB) 下載

    • Frequency Sheet XS Wireless 1&2 E range (821 - 832 / 863 - 865 MHz) (190 KB) 下載

    • Frequency Sheet XS Wireless 1&2 GB range (606 - 630 MHz) (230 KB) 下載

  • Technical Data
    • 技术参数 XS Wireless 1 (2.2 MB) 下載

  • 快速指南
    • 简要说明 XS Wireless 1 (3.5 MB) 下載

  • EU Declaration of Conformity
    • EU Declaration of Conformity XS Wireless 1 / XS Wireless 2 series (650 KB) 下載


  • 相關產品