Discover Audio for Video
ew 135 G3

ew 135 G3

Reliable, robust vocal set fit for every style of music: SKM 100-835 G3 cardioid vocal microphone, EM 100 G3 true diversity receiver with backlit graphic display, MZQ 1 microphone clip.
選擇產品變體

概述

功能全面,適合各式的音樂和簡報:你可以全心信賴ew 135 G3人聲系統的卓越性能。現在,即使充電電池在發射器中,也可以對其進行充電。只需按下同步按鈕,即可實現發射器和接收器的無線連接。真分集式接收器有帶背光的圖形化顯示幕,讓你能在任何燈光環境下進行監控。



特性

  • 堅固的金屬外殼

  • 42 MHz 的切換頻寬,1680個可調諧的UHF頻率帶給你無干擾的接收

  • 增強的頻率組系統,每組最多12個兼容頻率

  • 真分頻技術,頂級接收品質

  • 強化的AF頻率範圍

  • 提升了音訊靈敏度範圍

  • 通過紅外介面,與發射器進行無線同步

  • 人性化的功能表操作,更多控制選項

  • 光亮圖形化顯示(發射器和接收器)

  • 自動鎖定功能,避免設置被意外更改

  • HDX壓縮擴展器,獲得水晶般清透的聲音

  • 發射器具備4階電池指示,同樣能在接收器上顯示

  • 手持發射器可以輕鬆更換來自evolution系列的咪高峰模組

  • 集成Equalizer和Soundcheck模式

  • 發射器中帶有可直接充電的觸點,支援可充電的BA 2015電池組

  • 多種配件,讓系統滿足更多需求


包裝內含?

  • 1 台 EM 100 G3 機架式接收機
  • 1 個SKM 100-835 G3 手持無線咪高峰(動圈, 心形)
  • 1 個 MZQ 1 咪高峰夾
  • 1 個 NT 2 供電單元
  • 2 根天線
  • 2 個堆疊零件
  • 2 節AA 電池
  • 使用手冊

技術數據

  • 頻率範圍
    606...648 Mhz
    925...937.5 MHz / Korea
    823...865 MHz / 供電單元 UK
    頻率範圍823...865 MHz / 供電單元EU/Germany
    頻率範圍 823...865 MHz / 供電單元 EU
    頻率範圍 780...822 MHz / 供電單元 UK
    頻率範圍780...822 MHz / 供電單元EU/Germany
    頻率範圍 780...822 MHz / 供電單元 EU
    頻率範圍 734...776 MHz / 供電單元 UK
    頻率範圍 734...776 MHz / 供電單元 US
    頻率範圍 734...776 MHz / 供電單元 EU
    頻率範圍 626...668 MHz / 供電單元 UK
    頻率範圍 626...668 MHz / 供電單元 US
    頻率範圍 626...668 MHz / 供電單元 EU
    頻率範圍 626...668 MHz / 供電單元 EU
    頻率範圍 566...​​608 MHz / 供電單元 US
    頻率範圍 566...​​608 MHz / 供電單元 EU
    頻率範圍 516...558 MHz / 供電單元 US
    頻率範圍 516...558 MHz / 供電單元 EU
  • 尺寸
    接收器: 82 x 64 x 24 mm
  • 尺寸
    發射器: Ø 50 x 265 mm
  • 頻率響應(話筒)
    80 - 18000 Hz
  • 壓擴器
    HDX
  • Audio-XLR接頭
    3.5 mm插口
  • 預設
    12
  • 話筒
    動圈式
  • 声压级
    最大154 dB SPL
  • THD,總諧波失真
    < 0,9 %
  • 重量
    接收器: ~ 160 g
  • 重量
    發射器: 450 g
  • AF 靈敏度
    2,1 mV/Pa
  • 信噪比
    > 110 dB(A)
  • RF頻率範圍
    516...865 MHz
  • RF輸出功率
    30 mW
  • 傳輸/接收頻率
    1680
  • 交換帶寬
    42 MHz
  • 峰值偏差
    +/- 48 kHz
  • 符合
    ETS 300422, ETS 300445, CE, FCC
  • 工作時間
    發射器: > 8 h
  • 天線接頭
    2 BNC, 50 Ω
  • 音頻輸出電平(平衡)
    XLR : +18 dBu max
  • 音頻輸出電平(非平衡)
    Jack : +10 dBu max

FAQ

  • Can the EW products utilize a rechargeable battery system?

    For the Sennheiser EW Series equipment there is a proprietary rechargeable battery system that is designed specifically for these products to ensure the best operation time possible when using rechargeable batteries. 

    The rechargeable battery system consists of the following components:

    - BA2015G2 = (rechargeable battery pack) 
    - L2015 = (charger for two units) 

    - LA2 = (charging slot-in adapter for a G3 or 2000 series handheld microphone)  
    - NT1-120 = (power supply for a single L2015 charger) 

    - NT3-1-US = (power supply for up to three (3) L2015 chargers daisy chained together) 

    NOTE: The BA2015G2 battery pack can be placed directly into the L2015 charger for charging. When using the BA2015G2 battery pack in a SK or EK device the whole body pack can slot directly into the charger to charge the battery packs allowing charging in the device.  

    When a handheld microphone is used in conjunction with the LA2 adapter the handheld microphone and LA2 adapter can slot directly into the charger to charge the battery pack without having to remove the battery pack from the handheld microphone.



    ew 135 G3-GB ( #504642 )
  • How do I find a frequency EW series (ie: perform a frequency scan)?

    HOW TO PERFORM AN EASY SETUP SCAN on Evolution Wireless G3 systems

    For a detailed "how-to" video of this process, please navigate to this link:

    https://www.youtube.com/watch?v=MoancPzRKMQ

    If at any point you wish to exit back out to the main operating screen you can press the "POWER" button to exit.  This works on all EW pieces.

    1. Turn on your receiver (please leave the transmitter turned off). 

    2. Push the SET button on your receiver to enter the menus.

    3. Use the arrow buttons or knob to scroll to the EASY SETUP menu. Push SET which brings you into the EASY SETUP menu. 

    4. Use the arrow keys or knob to scroll down to SCAN NEW LIST.  Push the SET button to start the scan. You'll now see a progress bar on your screen as your receiver scans through all possible frequencies and looks for those with low background noise.  This will take about 60 seconds, depending on model.

    5. When the scan completes, push SET two times to accept its recommended bank # and channel #.  Your display will say “Stored.”  Tap the power button to exit to the main menu.  

    It is a good idea at this time to verify the frequency is actually clean and free.  A clean frequency will show no activity on the RF and AF "bars" on the display when the transmitter is off.  If you do see activity, repeat steps 4 and 5. 

    6. Turn on your G3 transmitter, and if it is a bodypack style - open the battery door.  Back on your receiver, push the "SYNC" button on the front panel.  The display should say "SYNC".  Hold the bodypack or handheld about 6 inches away from the receiver display with the screens facing each other (and the bodypack door open if it is a bodypack).  You should see a "check" mark on the display indicating that the sync was successful.  If the sync fails, you will see an "X" on the display and you should repeat this step.

    Helpful Hints:

    It is very IMPORTANT to use the same frequency "bank" number (1-20) for multiple systems in the same frequency range (A/B/G).  The frequencies in a particular BANK are all guaranteed to be compatible so multiple systems won't cause interference with each other.  For example if you have 3 systems to setup and BANK3 is free, you will want to use BANK3/CHANNEL1, BANK3/CHANNEL2, BANK3/CHANNEL3.  Mixing BANKS with multiple systems of the same frequency range (A/B/G) is never a good idea.  You do not have to choose the same BANK number for systems in different frequency ranges (A/B/G).  For example, if you picked BANK3 for your "A" range systems you do not have to pick BANK3 for your "G" range systems.

    If you are in a challenging RF environment and your system reports 0 frequencies free, change the SQUELCH setting on the receiver to "Medium" and perform the steps again.

    Most Sennheiser systems are sold in either the "A", "G", or "B" frequency ranges so if all of your systems are in the same band / group, you can save time by performing a scan once and set all systems into the same bank but on diff. frequencies in that bank by using the FREQUENCY PRESET menu.

    Example:  If you have 2 systems in the "A" band, and 2 more systems in the "B" band.  You will need to perform a scan on one of the "A" units and then set both units onto the same open bank (but different CHANNELS), while then performing a new scan for the "B" equipment and setting those 2 units into their own open bank.

    It is recommended for you to perform a new scan whenever you change venues or locations, as every location has different RF conditions - even from inside to outside a building!

    FOR MULTIPLE SYSTEMS

    - Remember to use the same BANK (but different channels) for systems in the same frequency range!

    - Keep in mind, background noise changes as you move to new locations, so always check your receiver before turning on the transmitter.  You may need to perform a fresh scan at each new location, to make sure you're using the most reliable frequency for your wireless mics.  The RF and AF meters should be empty if you have the transmitters off.

    SQUELCH

    The SQUELCH setting helps defend against static coming through your system when the transmitters are off.  Raising the SQUELCH will increase this protection while DECREASING the transmission distance.  If you perform the "EASY SETUP/SCAN NEW LIST" to ensure you are on a free frequency, this shouldn't be an issue.  For more protection you can adjust the SQUELCH to "Medium" however the default setting is "LOW" for maximum range.

    To adjust SQUELCH: Use the arrows to find SQUELCH. Hit SET and adjust Squelch to LOW.  Hit the SET button to store this setting. 



    ew 135 G3-GB ( #504642 )
  • What adjustments can I do to improve sound quality on EW Series?

    There are two main settings that will typically affect sound quality:

    MICROPHONE SENSITIVITY
    This is how sensitive the microphone pick up is and this is adjusted on the handheld microphone, bodypack or SKP transmitter itself. Typically for general speaking the sensitivity should be set around -15 to -18 dB. You will need to adjust this depending on the exact application. Closer to 0 dB is more sensitive and further away from 0 dB is less sensitive. If the microphone is too sensitive the input will overload the microphone and the AF level will peak and the audio will be clipped.  The sensitivity should be set so the AF PEAK indicator only lights up during the loudest passages.

    AF OUT
    This is how strong the final signal exits the receiver into the sound board/PA system/recorder etc.  The "AF OUT" setting is found only in the receiver's menu settings.  Typically this will be set around 0 dB or +6 dB if you connecting to a line level input on the sound board/speakers/etc. If you are trying to connect to a device which expects a mic level input, you will typically need to drop this AF output down to -24 dB or -30 dB.

    NOTE: If the AF Output is too high it may overload the input (peak) on connected device and may create undesirable noise (distortion, rumbling, etc).



    ew 135 G3-GB ( #504642 )
  • What is the wiring configuration for an XLR to EW Plug?



    ew 135 G3-GB ( #504642 )
  • Can 700 MHz components be changed to a different frequency range?

    The Evolution Wireless (EW) products are built according to their frequency range when manufactured.  It is not possible to re-tune or switch the frequency without switching out the RF boards which is often more expensive than purchasing new equipment.



    ew 135 G3-GB ( #504642 ), EW 135 G3-K+ ( #505525 ), EW 135 G3-E-UK ( #503253 ), EW 135 G3-E-EU-X ( #503252 )
  • Why is it illegal to use wireless microphones in the 700 MHz range in the USA?

    In June 2010 the FCC instituted regulations that made it illegal to operate wireless microphones within the 700 MHz frequency range in the United States.

    With the transition to digital television TV broadcasters vacated a large section of the UHF spectrum (from 698 to 806 MHz) so the FCC auctioned the 700 MHz band to the highest bidders (including AT&T and Qualcomm) to facilitate the development of wireless broadband Internet service throughout the United States. In addition, the FCC has reserved select frequencies in the 700 MHz band for emergency and national security purposes.

    NOTE: The FCC is the Government agency tasked to regulate interstate communications by radio, television, wire, satellite, and cable in all 50 states, the District of Columbia and U.S. territories. The FCC sets the guidelines and regulations for all broadcast equipment (including wireless microphones).



    ew 135 G3-GB ( #504642 ), EW 135 G3-K+ ( #505525 ), EW 135 G3-E-UK ( #503253 ), EW 135 G3-E-EU-X ( #503252 )
  • EW

    EW is the acronym for Evolution Wireless.



    ew 135 G3-GB ( #504642 ), EW 135 G3-K+ ( #505525 ), EW 135 G3-E-UK ( #503253 ), EW 135 G3-E-EU-X ( #503252 )

下載

  • Technical Information
    • ew G3 System Configuration (2.7 MB) 下載

    • Working with ew G3 (2.8 MB) 下載

  • Frequency Sheets
    • Frequency sheet ew G3 - Range B: 626 - 668 MHz (180 KB) 下載

      Information on the frequency presets used in the ew G3 series devices. Range B: 626 - 668 MHz

    • Frequency sheet ew G3 - Range A: 516 - 558 MHz (180 KB) 下載

      Information on the frequency presets used in the ew G3 series devices. Range A: 516 - 558 MHz

    • Frequency sheet ew G3 - Range C: 734 - 776 MHz (180 KB) 下載

      Information on the frequency presets used in the ew G3 series devices. Range C: 734 - 776 MHz

    • Frequency sheet ew G3 - Range D: 780 - 822 MHz (180 KB) 下載

      Information on the frequency presets used in the ew G3 series devices. Range D: 780 - 822 MHz

    • Frequency sheet ew G3 - Range E: 823 - 865 MHz (180 KB) 下載

      Information on the frequency presets used in the ew G3 series devices. Range E: 823 - 865 MHz

    • Frequency sheet ew G3 - Range G: 566 - 608 MHz (180 KB) 下載

      Information on the frequency presets used in the ew G3 series devices. Range G: 566 - 608 MHz

    • Frequency sheet ew G3 - Range GB: 606 - 648 MHz (180 KB) 下載

      Information on the frequency presets used in the ew G3 series devices. Range GB: 606 - 648 MHz

    • Frequency sheet ew G3 - Range A1: 470 - 516 MHz (240 KB) 下載

      Information on the frequency presets used in the ew G3 series devices. Range A1: 470 - 516 MHz

  • 特性列表
    • Product specification ew 100 Sets (1.6 MB) 下載

      Product specification ew 100 Sets: ew 112 G3, ew 112 G3, ew 152 G3, ew 172 G3 and ew 135/145/165 G3

  • EU Declaration of Conformity
    • EU Declaration of Conformity ew G3 and accessories (790 KB) 下載

  • 用戶指導手冊
    • Instruction manual ew 100 Series G3 (6.7 MB) 下載

      EM 100 G3, SK 100 G3 and SKM 100 G3