SKM 5200-II
The next evolution of the SKM 5200 worldclass microphone. Extended switching bandwidth of up to 184 MHz. One fixed, one variable channel bank. Low Intermodulation Mode for higher inference immunity. Very rugged housing.
選擇產品變體

SKM 5200-II是世界級咪高峰SKM 5200的新一代產品。這款堅固、可靠、用戶友好的專業手持式咪高峰,適用於各種能夠想像到的錄音和拾音應用。其機械、電子和操作設計理念,能夠滿足現場活動的最高要求。因此,SKM 5200-II提供了最高184MHz的切換帶寬。 Sennheiser開發的"HiDyn plus"噪聲抑制系統,可以把射頻噪聲降到最低,同時確保非常寬的動態範圍和透徹清晰的音質。編程極其靈活:SKM-II 5200同時具有固定通道頻段和可變通道頻段。所有參數都顯示在背光LCD顯示屏上,可以鎖定以防止意外調整,檢查只需幾秒鐘時間。 SKM 500-II現有四種頻率派生產品——L、N、N-US和P,以及三種顏色:黑色、鎳金屬色、鋼青色(赭石色)。該手持式發射器與5000系列的各種咪高峰頭、電池和可充電電池盒以及紐曼咪高峰頭兼容。

  • 最高到180MHz切換帶寬

  • 低互調模式(LoI)

  • 可切換輸出功率

  • 獲獎設計

  • 音頻靈敏度從-40到0dB可調,間隔1dB

  • 2節AA電池,可以保證工作最少7個小時

  • 頻率可調,間隔5kHz

  • 方便的旋鈕操控

  • 可切換低頻切除

Pro Talk Video Series

Pro Talk Video Series

World-renowned Sound Engineers sharing tips, tricks and stories.
Subscribe and do not miss any episode of our Pro Talk Video Series
on YouTube! 更多細節
評測
Be the first to write a review.

Specifications
包裝內含

支援
聯繫我們
Product Support Phone

Product Phone


FAQ
  • What are the operating frequency ranges of the different wireless microphone systems?



  • What do I do when there is "noise" in the wireless system?

    It is likely that the noise/static/interference you’re experiencing is being caused by a background RF signal from an external source (ie: broadcast TV or radio stations, other wireless microphones, etc) on the same frequency as your wireless system.

    This can be confirmed this by turning off the transmitter and checking the receiver’s display. If there is an RF signal showing on the receiver's display when the transmitter is off that indicates that the receiver is picking up an RF signal from an external source and the receiver is trying to tune this external RF signal which will sound like a broad white noise.

    One of the most important steps for proper setup is turning on the receiver first and checking what it sees in the absence of your microphone signal. If the receiver sees an RF signal being generated by an outside source (ie: noise) then you need to retune the system. Depending on which system is being used the exact steps on how to change frequencies will vary. NOTE: When using multiple wireless systems the frequencies need to be co-ordinated together to ensure that they do not interfere with each other.

    Once a new frequency is selected get back to the receiver's main display. If there is no RF registering then this new frequency is a "clean" frequency on which to operate.

    Keep in mind the RF environment changes from location to location so it is important to always check the receiver for RF levels before turning on the transmitter. It is best practice to always do a frequency scan when using equipment in a new location.

    The RF environment is often constantly changing so a frequency scan is really only completely accurate for the exact time that the frequency scan is done (ie: a frequency scan done on Wednesday night could yield different results to a frequency scan done on Sunday morning). Ultimately to ensure a frequency scan is still valid you want to turn on the receivers and leave the microphones off. In this state the receivers should be showing no RF signal to indicate that they are on a clean usable frequency. If you turn on the receivers (with the microphones off) and you are seeing a lot of RF activity that indicates that something in the RF environment has changed and now the frequency which was previously "clean" (and hence usable) is now "dirty" (ie there is an external RF signal on it) and you will need to set the receiver to use a different frequency.



  • What frequency can I use outside of the United States?

    There are no universal rules which govern the use of wireless microphone equipment globally. The rules and regulations regarding which frequencies are allowed for wireless microphones vary widely by country. All Sennheiser products that are sold in the US are congruent to the US rules and regulations as mandated by the FCC.

    We can provide information regarding rules and regulations for the US, however because rules and regulations vary from country to country, we cannot advise which frequencies to use outside of the US. Unfortunately there is no universal database that contains all this information. 

    For information about the rules and regulations for a specific country it is recommended that you directly contact the embassy of the country in question to find out the rules and regulations or contact the Sennheiser subsidiary or partner company in the country in question.  You can find contact details for these subsidiaries and partner companies here: (http://en-us.sennheiser.com/service-support-contact-service-partner-worldwide).



  • Why is it illegal to use wireless microphones in the 700 MHz range in the USA?

    In June 2010 the FCC instituted regulations that made it illegal to operate wireless microphones within the 700 MHz frequency range in the United States.

    With the transition to digital television TV broadcasters vacated a large section of the UHF spectrum (from 698 to 806 MHz) so the FCC auctioned the 700 MHz band to the highest bidders (including AT&T and Qualcomm) to facilitate the development of wireless broadband Internet service throughout the United States. In addition, the FCC has reserved select frequencies in the 700 MHz band for emergency and national security purposes.

    NOTE: The FCC is the Government agency tasked to regulate interstate communications by radio, television, wire, satellite, and cable in all 50 states, the District of Columbia and U.S. territories. The FCC sets the guidelines and regulations for all broadcast equipment (including wireless microphones).



下載

  • 用戶指導手冊
    • Instruction manual SKM 5200-II (3 MB) 下載

  • EU Declaration of Conformity
    • EU Declaration of Conformity SKM 5200-II (650 KB) 下載

  • 固件升級
    • Sennheiser Firmware EM 373x Version 2.2.0 incl. SK 5212-II/SKM 5200-II Version 3.1.0 (530 KB) 下載

  • Frequency Sheets
    • Frequency tables SKM 5200-II (180 KB) 下載

      Frequency tables SKM 5200-II for frequency range P, L and N

  • 應用軟件
    • Sennheiser Transmitter Manager - Version 3-3-1 (6.4 MB) 下載

  • Misc Sheets
    • Additional Information (820 KB) 下載