Inspire your audience. Easy to use all-in-one wireless system for public speakers and presenters.

Pro Talk Video Series

Pro Talk Video Series

World-renowned Sound Engineers sharing tips, tricks and stories.
Subscribe and do not miss any episode of our Pro Talk Video Series
on YouTube! 更多細節


Inspire your audience. Go for XS WIRLESS 1 and rely on a solid wireless transmission with up to 10 compatible channels in a stable UHF band. The XS WIRELESS 1 LAVALIER MIC SET is an easy to use all-in- one wireless system for presenters and moderators, excellent for a powerful and inspiring presentation. The set includes an intuitive stationary receiver for quick set-up and hassle-free handling, as well as a lightweight bodypack transmitter and an unobstrusive clip-on microphone.


  • Compact bodypack transmitter, unobstrusive clip-on microphone

  • Antenna-switching diversity reception

  • Integrated antennas

  • Automatic frequency management and synchronization via remote channel for easy setup

  • Selectable UHF frequencies within a large bandwidth

  • Up to 10 compatible channels


  • 1 receiver EM-XSW 1
  • 1 lavalier microphone ME 2-2
  • 1 bodypack transmitter SK-XSW
  • 1 power supply NT 12-5 CW
  • 2 AA batteries



  • 尺寸
    approx. 200 x 42 x 127 mm
  • 重量
    approx. 340g
  • 電源
    12 V DC nom. / 300 mA
  • 音频频率响应
    50 to 16,000 Hz (–3 dB)


  • 尺寸
    approx. 71 x 96 x 28 mm
  • 重量
    approx. 95g
  • 電源
    2 AA size batteries, 1.5 V
  • Adjustment Range Transmitter
    0 to -30 dB, adjustable in 10 dB steps

  • 話筒
  • THD,總諧波失真
    ≤ 0.9%
  • 拾音模式
  • 信噪比
    ≥ 103 dBA
  • RF輸出功率
    10 mW
  • 交換帶寬
    up to 24 MHz
  • 工作時間
    approx. 10 hrs
  • 調製
    wideband FM
  • 輸出電壓
    '1/4“ (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu
  • 外殼
    rugged ABS housing
  • 分集接收
    antenna switching diversity via internal antennas
  • 頻率
    8 frequency banks, each with up to 10 factory-preset channels
  • 頻率範圍
    A: 548-572 MHz, GB: 606-630 MHz
    B: 614-638 MHz, C: 766-790 MHz
    D: 794-806 MHz
    E: 821-832 MHz, 863-865 MHz
    K: 925-937.5 MHz
  • 靈敏度
    < 3 μV at 52 dB(A)rms S/N
  • 峰值偏差的聲壓級
    130 dB
  • 靜音
    adjustable from 3 dBμV to 28 dBμV (combined with pilot tone)
  • 同步
    2.4 GHz, Low Power OQPSK (only active during synchronization)
  • 輸入靈敏度
    1.5 mV / Pa
  • Audio adjustment range
    45 dB, adjustable in 5-dB steps
  • Line / Mic level
    20 dB, switchable
  • 溫度範圍
    operation: 0°C to +40°C, storage: –20°C to +70°C
  • 接收器原理
    double superheterodyne


  • How do I find a frequency (ie: perform a frequency scan)?

    To perform a frequency scan on the XS Wireless products follow these steps:

    1) Press the "UP" or "DOWN" button to scroll through the menu options on the receiver.

    2) Press the "SET" button to select the SCAN option. NOTE: The unit automatically selects the next available unused frequency. 

    Once the new frequency is selected on the receiver the transmitter needs to by synced to the receiver. To do this follow these steps:

    1) Press and hold the "SYNC" button on the transmitter until the "SYNC" symbol flashes on the receiver.

    2) Press the "SYNC" button on the receiver.

    NOTE: If a frequency SCAN is performed and no available frequencies are found then the SQUELCH setting will need to be increased. Once the SQUELCH setting has been increased repeat the steps of the frequency scan and then SYNC accordingly.

    XSW 1-ME2-B ( #506981 ), XSW 1-ME2-GB ( #506985 ), XSW 1-ME2-K ( #506986 )
  • What adjustments can I do to improve sound quality?

    There are two settings that have the greatest effect on sound quality:

    This is how sensitivity the microphone pick up is and this is adjusted on the microphone/body pack itself. Typically for general speaking the sensitivity should be set around -15 to -18 dB. You will need to adjust this depending on the exact application. Adjusting closer to 0 dB is will be more sensitive and further away from 0 dB is less sensitive. If the microphone is too sensitive the input will overload the microphone and the AF level will peak and the audio will be clipped.  It is suitable to adjust the level so that the AF peak indicator lights up only briefly during the loudest passages.

    This is how strong the signal is exiting out of the receiver into the sound board/speakers/etc. Typically this will be set to 0 dB or +6 dB if connected to equipment which is expecting a line level input . If you are connected to equipment expecting a mic level input you will typically need to drop this AF output down to -24 dB or -30 dB.  If your equipment has the option, it is best to try to run the equipment in line level mode.

    NOTE: If the AF Output is too high it may over load the input on any connected equipment (sound board/speakers/etc) and may create noise in the form of distortion/rumbling.

    XSW 1-ME2-K ( #506986 )
  • Why is there no audio coming from the microphone?

    Not having audio coming from a microphone could be caused by a few different scenarios.
    Firstly check that the transmitter and receiver are both on the same frequency as this is key to the system working.
    Next check to make sure that the "MUTE" switch is not accidentally engaged (either fully or partially). The best way to do this is click the mute switch on and then back off.
    After checking the "MUTE" switch if no audio is present make sure that the microphone element is securely in place. If using a body pack transmitter make sure that the microphone or guitar cable is securely in place by disconnecting it and reconnecting it. NOTE: On the handheld microphone the capsule is locked into place and cannot come loose.
    If you are seeing RF and AF levels on the receiver but do not have any sound through your system it would be recommended to check the cables between the receiver and sound system, check the inputs on the sound system and check the AF out level on the receiver to ensure that it is set to the appropriate level for your sound system.

    XSW 1-ME2-B ( #506981 ), XSW 1-ME2-K ( #506986 )


  • Frequency Sheets
    • Frequency Sheets Range K (210 KB) 下載

    • Frequency Sheet Range B (190 KB) 下載

    • Frequency Sheet Range C (190 KB) 下載

    • Frequency Sheet Range D (190 KB) 下載

    • Frequency Sheet Range E (190 KB) 下載

    • Frequency Sheet Range GB (230 KB) 下載

    • Frequency Sheet Range A (190 KB) 下載

  • Technical Data
  • 快速指南
  • EC Declaration of Conformity
    • EU Declaration of Conformity XS Wireless 1 / XS Wireless 2 series (1.4 MB) 下載