LSP 500 PRO

Complete wireless integrated PA system. Wireless controllable via iPad or Windows device.
物品編號 505476

概述

The LSP 500 PRO is a wireless two-way audio system for professional use. It has been designed to address audiences at indoor and outdoor events without the need of any power or audio cables. The LSP 500 PRO allows you to install up to three receivers for wireless microphones. You can also play music wirelessly via a Bluetooth connection. Alternatively, you can use the integrated media player to play music from your USB storage device. For larger events you can send the sum signal of one LSP 500 PRO via a wireless transmitter to other LSP 500 PRO devices. The LSP 500 PRO is remote controllable via iPad App or Windows Remote Control Software, which serves as a mixing console and permits the control of up to 20 LSP 500 PRO simultaneously.


特性

  • Complete wireless integrated PA system

  • Wireless control via iPad or Windows device

  • Professional 2-way speaker

  • Battery powered

  • Integrated Bluetooth and USB player

  • integrated 7 channel audio mixer


技術數據

  • 尺寸
    290 x 550 x 320 mm
  • 频率响应
    65 – 18000 Hz (-10 dB)
  • 声压级
    最大110 dB SPL (全空間輻射)
  • 重量
    近似​​ 13.6公斤(30磅)
  • 充電時間
    近似5小時(每塊電池大 約2.5小時)
  • 工作溫度
    0 °C - 50 °C
  • 電源
    CA 90-240 V, 50-60 Hz
  • 声音放大
    D類
  • 声学
    兩分頻系統,閉箱設計
  • 音頻輸出功率
    55 W連續輸出功率,120 W 峰值輸出功率
  • 電池規格
    2塊森海塞爾的LBA 500,鋰離子電池,14.4 V / 4.4 Ah
  • 揚聲器類型
    ¾“壓縮式驅動單元

FAQ

  • Does the LSP 500 PRO system include the microphone?
    No. While the LSP 500 PRO can accommodate up to three (3) half rack components these components are purchased separately.

    LSP 500 Pro ( #505476 )
  • How do you transmit audio from the PRIMARY LSP 500 PRO to the SECONDARY LSP 500 PRO’s?
    To create a unified wireless speaker system all audio sources would be input to the PRIMARY LSP 500 PRO. In one of the component slots of the PRIMARY LSP 500 PRO you would connect a SR 300 IEM G3 transmitter and into one of the component slots of each SECONDARY LSP 500 PRO you would connect an EM 300 G3 receiver. The SR 300 IEM G3 transmitters takes all audio input to the PRIMARY LSP 500 PRO and transmits it to the EM 300 G3 receivers in the SECONDARY LSP 500 PRO units.

    LSP 500 Pro ( #505476 )
  • Are the batteries of the LSP 500 PRO “hot swappable”?

    If you have two (2) batteries in the LSP 500 PRO then you can remove the battery that is not in use and replace it with a freshly charged battery.



    LSP 500 Pro ( #505476 )
  • How much operation time will the battery of a LSP 500 PRO provide?
    Fully charged battery packs will provided approximately 6 hours of operation (approximately 3 hours per battery).

    LSP 500 Pro ( #505476 )
  • How long does it take to charge a LSP 500 PRO battery pack?
    A complete charging cycle will take approximately 5 hours (approximately 2.5 hours per battery pack) if the LSP 500 PRO is switched off. If the LSP 500 PRO is in use then the battery charging time would be extended.

    LSP 500 Pro ( #505476 )
  • Can the LSP 500 PRO be powered via an electrical cable?
    Yes. The LSP 500 PRO can be powered either via the battery pack or via a power cable (referred to as a “mains cable”).

    LSP 500 Pro ( #505476 )

下載

  • EC Declaration of Conformity
    • EC Declaration of Conformity (310 KB) 下載

  • Technical Data
    • Outline dimensions (DXF) (4.8 MB) 下載

    • Outline dimensions (DWG) (900 KB) 下載

  • Application Notes
    • Application Note Microphone Level Adjustment (530 KB) 下載

    • Application Note Audio Links (100 KB) 下載

    • Application Note LSP 500 PRO Windows Software - Multicast Routing (46 KB) 下載

  • High Resolution Images
    • LSP 500 Pro isoback left RGB (5.2 MB) 下載

    • LSP 500 PRO (3.5 MB) 下載

    • LSP 500 PRO front HC RGB (8.2 MB) 下載

    • LSP 500 PRO back HC RGB (6.1 MB) 下載

  • Spec Sheets
    • LSP 500 PRO Specification Sheet (620 KB) 下載

  • Digital Brochures
    • Digital brochure LSP 500 PRO (2.4 MB) 下載

  • Firmware Updates
    • LSP 500 PRO Firmware - Version 1.7.6 (6.4 MB) 下載

  • Release Note
    • Release Note RN 1174 v1.0 - LSP 500 PRO Firmware Version 1.7.6 (210 KB) 下載

  • Instruction Manual
    • Instruction manual LSP 500 PRO (13 MB) 下載

  • Simulation Data
    • LSP 500 PRO Simulation Data (980 KB) 下載

  • Mounting Instructions
    • Mounting instructions LAH 500 (1000 KB) 下載

  • Application Software
    • LSP 500 PRO Windows Remote Control Software (14 MB) 下載

  • Technical Information
    • Product News LSP 500 PRO (660 KB) 下載